Rockwell Automation 2364F Regenerative DC Bus Supply Unit (RGU) - Manual (Page 162)

Publication 2364F-5.01– October 2003
D-18 Programming Parameters
83
It Foldback Current Limit
[It Fldbk Cur Lim]
This parameter indicates what percentage of the
rated DC bus current is being supplied by the
RGU. The percentage decreases as the heatsink
temperature increases.
Parameter Type Source (Read Only)
Display Units %
Drive Units Display Units * 5120/100
Factory Default 300
Minimum Value 0
Maximum Value 300
A value of 300% is displayed when the RGU is
not enabled.
84
Voltage Regulator Output
[Linear PI Out]
This parameter indicates the current reference
from the PI regulator (P121) after it has passed
the linearizer. Note that P35 bit 3 must be set to 1
to activate the linearizer.
Parameter Type Source (Read Only)
Display Units % of P11
Drive Units Display Units * 5120/100
Factory Default 0
Minimum Value -640
Maximum Value 640
Related Parameters P35, P121
The value is displayed as a percentage of the
Rated AC Line Current (P11).