Rockwell Automation 2364F Regenerative DC Bus Supply Unit (RGU) User Manual
Page 146
Publication 2364F-5.01– October 2003
D-2
Programming Parameters
1
RGU Software Version
[Software Version]
This parameter shows the version of software that
is currently installed in the RGU.
Parameter Type
Source (Read Only)
Display Units
None
Drive Units
Display Units * 100
Factory Default
3.01
Minimum Value
0.00
Maximum Value
99.99
2
Password
[Password]
This parameter sets the user password.
To select ‘no password’, set this to zero.
Parameter Type
Sink (Read/Write)
Display Units
None
Drive Units
Display Units * 1
Factory Default
0
Minimum Value
0
Maximum Value
65535
3
Language Select
[Language Sel]
This parameter is used to select the display
language.
Value
Description
Parameter Type
Sink (Read/Write)
Display Units
None
Drive Units
Display Units * 1
Factory Default
0
Minimum Value
0
Maximum Value
0
0
English
4
Frame Catalog Number
[Frame Catalog #]
This parameter stores the frame catalog number
of the RGU, describing the current code and input.
This value is used to configure P10, P11, P12,
and P16.
Parameter Type
Sink (Read/Write)
Display Units
None
Drive Units
Display Units * 1
Factory Default
11
Minimum Value
0
Maximum Value
15
Value Description
Value Description
0
Not Used
8
2364FA-LNB
(L-code, 460V AC)
1
2364FA-JNN
(J-code, 380V AC)
9
2364FA-LNC
(L-code, 575V AC)
2
2364FA-JNB
(J-code, 460V AC)
10
2364FA-MNN
(M-code, 380V AC)
3
2364FA-JNC
(J-code, 575V AC)
11
2364FA-MNB
(M-code, 460V AC)
4
2364FA-KNN
(K-code, 380V AC)
12
2364FA-MNC
(M-code, 575V AC)
5
2364FA-KNB
(K-code, 460V AC)
13
2364FA-NNN
(N-code, 380V AC)
6
2364FA-KNC
(K-code, 575V AC)
14
2364FA-NNB
(N-code, 460V AC)
7
2364FA-LNN
(L-code, 380V AC)
15
2364FA-NNC
(N-code, 575V AC)
5
RGU Control Mode
[RGU Control Mode]
This parameter is used to automatically configure
other parameters for a master-slave or a
standalone configuration.
Parameter Type
Sink (Read/Write)
Display Units
None
Drive Units
Display Units * 1
Factory Default
2
Minimum Value
0
Maximum Value
2
Related Parameters
None
Value Description
0
Master Mode
1
Slave Mode
2
Standalone