Rockwell Automation 2364F Regenerative DC Bus Supply Unit (RGU) - Manual (Page 197)

Publication 2364F-5.01– October 2003
Programming Parameters D-53
283
Scratch Pad 3
[Scratch Pad 3]
This parameter can be used to store
miscellaneous positive values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value 0
Maximum Value 65535
284
Scratch Pad 4
[Scratch Pad 4]
This parameter can be used to store
miscellaneous positive values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value 0
Maximum Value 65535
285
Scratch Pad 5
[Scratch Pad 5]
This parameter can be used to store
miscellaneous positive values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value 0
Maximum Value 65535
286
Scratch Pad 6
[Scratch Pad 6]
This parameter can be used to store
miscellaneous positive and negative values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value -32768
Maximum Value 32767
287
Scratch Pad 7
[Scratch Pad 7]
This parameter can be used to store
miscellaneous positive and negative values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value -32768
Maximum Value 32767
288
Scratch Pad 8
[Scratch Pad 8]
This parameter can be used to store
miscellaneous positive and negative values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value -32768
Maximum Value 32767
289
Scratch Pad 9
[Scratch Pad 9]
This parameter can be used to store
miscellaneous positive and negative values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value -32768
Maximum Value 32767
290
Scratch Pad 10
[Scratch Pad 10]
This parameter can be used to store
miscellaneous positive and negative values.
Parameter Type Sink (Read/Write)
Display Units None
Drive Units Display Units * 1
Factory Default 0
Minimum Value -32768
Maximum Value 32767
291,292
P291 and P292 are for internal use only.