Rockwell Automation 2364F Regenerative DC Bus Supply Unit (RGU) - Manual (Page 121)

Publication 2364F-5.01– October 2003
Setting Up Trending 12-3
To set the trigger condition:
1.
2.
3.
If you want variable X to be a: Then:
Parameter value Identify the parameter number of that parameter.
Constant value Select a desired constant value in the range of +32767
to -32768.
If you have identified a parameter
number for variable X and are
programming Trend:
Then enter the number of the parameter to be
sampled in:
1 P294
2 P306
3 P318
4 P330
If you have selected a constant
value for variable X and are
programming Trend
Then:
1 1. Set P294 to"0".
2. Enter the desired constant value
in P295.
2 1. Set P306 to"0".
2. Enter the desired constant value
in P307.
3 1. Set P318 to"0".
2. Enter the desired constant value
in P319.
4 1. Set P330 to"0".
2. Enter the desired constant value
in P331.