AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 138)

Chapter 11: Board Configuration
122 MaxCS 7.5 Administration Manual
Figure 71. PRI ISDN Numbering Plan dialog box
The PRI ISDN Numbering Plan dialog box displays the six classes of numbers (call type) that can be sent to
a CO:
• 101CCCC Numbers – CIC (Carrier Identification Codes) dialing.
• 011 International Numbers – For placing calls outside the U.S.
• 1+10-digit Numbers – For local and long distance calls that require dialing 1 before the number.
• 10-digit Numbers – For local and long distance calls that do not require 1 before dialing.
• 7-digit Numbers – For calls placed within the local area that do not require an area code or a 1 prefix.
• All Other Numbers – For calls that do not fall into any category above, for example, 911, 311.
For each class, select the type of number/numbering plan from the list:
• Type of Number:
–
Unknown
– International
– National
–
Network Specific
– Subscriber Number
• Numbering Plan:
–
Unknown
–
ISDN
– National
–
Private
The setting Unknown is used when the user or network has no knowledge of the numbering plan. In this case,
the number digits field is organized according to the network dialing plan.
B Channel Maintenance Message:
This setting controls B channel initialization and maintenance message exchange between MAXCS and the
CO, when the system starts up. Select the maintenance message that will be delivered on the B Channel: