AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 241)

Configuring an Extension as a Mobile Extension
MaxCS 7.5 Administration Manual 225
5. Note the logical ID of the MobileExtSP board. You will need it when you assign an extension to a mobile
port.
6. When you are finished adding channels as mobile trunks, restart MaxCS 7.5 .
Configuring an Extension as a Mobile Extension
To configure an extension as a mobile extension,
1.
Open the Extension Configuration window.
2. To assign an extension to a mobile extension port, select a virtual extension and change it to a physical
extension.
Figure 131. Changing a virtual extension to a physical extension and setting the location
3. By clicking the Next or Prev button in the Location panel, select the Logical Board ID of the MobileExtSP
board and Logical Channel ID for this extension, then click Apply.
The new location is displayed in the Agent/Supervisor/Extension list.
4. Click the Line Properties button to configure the mobile PSTN number and other options for the mobile
extension. The ExtensionAnywhere Configuration – MobileExtSP dialog box opens. (Alternatively,
from the Mobile Extension Board Configuration dialog box you can double-click the mobile extension port
to open the ExtensionAnywhere Configuration.)