Changing the enterprise manager password, Setting voip codec profiles – AltiGen MAXCS 7.0 Update 1 ACM Administration User Manual

Page 327

Advertising
background image

Setting VoIP Codec Profiles

MaxCS 7.5 Administration Manual

311

Tabs Displayed with the Servers Button

Information

tab displays information about the selected site and lets you configure a PSTN number for

global extension rerouting as a failover when the TCP/IP network is down. You may also assign an
alternate server to which to redirect global AltiGen IP phones when their primary server is down.

IP Networks

tab defines IP networks and the bandwidth information for an MAXCS site. Bandwidth usage

control for Internet and intranet can be set up here. If the bandwidth usage exceeds the maximum setting,
the call will not be established.

IP Dialing Table

tab defines the IP dialing table for a MAXCS site. Specified information here includes a

codec profile and a protocol (SIP) for the communication from this site to the selected site.

IP Codec

tab lets you specify an inter-gateway codec and define IP device ranges to which you can assign

a codec profile.

Number Plan

tab displays the number plan information that is set up in MaxAdmin, System Configuration

window, Number Plan tab.

Changing the Enterprise Manager Password

Only a person with DomainAdmin rights can change the Enterprise Manager password. To change the
password, click the Password button at the top of the Enterprise Manager window.

Figure 177.

The Change Password panel

Enter the old password, and the new password. Confirm the password, and click OK.

Setting VoIP Codec Profiles

The codec setting is profile-based. For different IP addresses and protocols, a different preferred codec can
be used. Each codec profile can have its own codec (G.711, G.722 on Softswitch or Cloud, G.723, G.729),
packet length, and jitter buffer. The codec profile can be assigned to connectivity with a remote server, IP
phone or other VoIP device.
By default, the following IP address ranges (private IP addresses) will use G.711 codec:

192.168.0.0 to 192.168.255.255

172.16.0.0 to 172.31.255.255

10.0.0.0 to 10.255.255.255

Advertising
This manual is related to the following products: