AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 377)

Configuring for Out Calling from UM
MaxCS 7.5 Administration Manual 361
3. On the Dialing Rule Groups tab, add dial rules for in-country/region and international calls that will be
placed by UM-enabled users. Each dialing rule entry that is defined on the dial rule group determines the
types of calls that users within a specific dial rule group can make.
Figure 211. Adding Dial Rule entries in the Dialing Rule Groups tab
For a Dialing Rule Entry (see (see Figure 211)), the following are required:
Name – Select a name of an existing dialing rule or, if you want to create a dialing rule, type the name of
the dialing rule (up to 32 characters, text characters only). This is the display name for the dialing rule that
will be displayed in the Exchange Management Console.
Number Mask – Define the number mask for the dialing rule. A number mask is used to define the tele-
phone number format that a Unified Messaging server will use to determine what outgoing telephone num-
ber it will dial for a user. When an outgoing call is made to a number that is matched by the number mask
on the dialing rule, the UM server will substitute the digits that are matched into the dialed number. It will
then use the digit string from this match to make the outgoing call. An example of a valid number mask is
91425xxxxxxx. This field can contain only numbers and the letter 'x'.
Dialed Number – Define the dialed number for the dialing rule. The dialed number is used to determine
the actual dial string that is sent to the IP gateway. This number can be different from the number that is
obtained by Unified Messaging for the outgoing call. However, your PBX can also be configured to omit
the area code for local calls and can be configured for private voice numbering plans. Any wildcard (x)
characters in the dial string are substituted with the digits from the original number that were matched by
the number mask on the dialing rule. An example valid dialed number is 9xxxxxxx. This field can contain
only numbers and the character "x".
Comment – Use this text box to input a comment or description for the dialing rule that you are adding.