AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 342)

The Multi-site VoIP Domain
326 MaxCS 7.5 Administration Manual
5. Enter the IP address of this system. If this system has multiple IP addresses, enter the one that can
communicate with other member servers.
6. Click OK and wait for 5 to 60 seconds, depending on the size and configuration of the system. The display
in the Enterprise Location Manager window changes to show the name of the VoIP domain and this server
as Master.
Declaring Additional Servers for the VoIP Domain
Additional servers are added to the VoIP domain in Enterprise Manager, but first you must “declare” these
servers and assign them a member key in MaxAdmin. To do so:
1.
Log on to the member server you want to declare.
2. Select VoIP > Multi-Site Domain Configuration. The Enterprise Location Manager window opens.
The name of the server and the name of the AltiGen product appear in the top box.
3. Check the Allow this server to be added to domain check box.
4. Enter the name of the VoIP domain that you want this server to be a part of.
5. Enter a member key for this server. The Member Key is the security password when the Domain Admin
adds this server into the domain. To reduce the complexity of administration, you can use the same key
for all member systems.