AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 52)

Chapter 3: Getting Around MaxAdministrator
36 MaxCS 7.5 Administration Manual
The Main Window
When you run MaxAdmin, you’ll see a window similar to the following figure:
Menu bar
Status bar
Figure 2. MaxAdministrator main window
The main menu bar is at the top. Below that are buttons for quick access to more commonly used configuration
screens. A status bar at the bottom contains information on the current runtime status.
The Main Menu
These are the menus and the functions found under each menu:
• Services – Log in and log out, change password, access utilities (backup and restore, convert work/hunt
group, import and export an extension list), shut down all services, and exit.
• System – Opens windows where you can configure system settings, gateways and media servers, voice
mail, auto attendants, multilingual support, call recording, application extensions. Also where you can
request certificates.
• PBX – Opens windows where you can configure trunks, in call routing, out call routing, extensions, AltiGen
IP phones, hunt groups, line park, and MeetMe conference. You can also manage MeetMe conferences
from this menu.
• Call Center – Opens windows where you can configure workgroups, agent logout reasons, and MaxCall.
• VoIP – Opens windows where you can configure the enterprise network, the multi-site domain, and the
refresh enterprise settings.
• Report – Opens windows where you can view the system summary and IP traffic statistics and configure
SNMP (simple network management protocol).
• Diagnostic – Opens windows where you can view the trace, view the system log, and view the AltiGen
network log.