AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 242)

For a mobile phone using
MaxMobile Communicator, clear
all the Phrase check boxes.
Chapter 18: Mobile Extension Configuration
226 MaxCS 7.5 Administration Manual
Figure 132. ExtensionAnywhere Configuration – MobileExtSP dialog box
• Name Enter the name of the person using the mobile phone.
• Target Phone Number – Enter the number of the mobile phone. This is used when MaxCS 7.5 makes
a call through PSTN to the mobile phone. Do not include the trunk access code.
• Caller ID – Enter the phone number of the mobile phone. This is for incoming caller ID verification.
MaxCS 7.5 uses it to determine whether a call is from a mobile extension. If the caller ID is matched,
the mobile extension user will hear a dial tone from the system, the same as an internal extension user
hears when the phone is off-hooked.
It's also used to find a mobile channel in the MaxMobile Communicator application, and it is used in the
MaxMobile Communicator login.
Note: When a MaxMobile user logs in to the MaxCS system, the assigned extension number, extension
password and cell phone number are used as identification. First, MaxCS 7.5 checks the
extension number and extension, then it uses the cell phone number to search the mobile channel
table. If MaxCS 7.5 finds one channel's Caller ID is the same as the cell phone number, it will
assign this channel to the extension number. The extension is allowed to log in as a mobile
extension. If no channel is found, the login fails.
• Mobile Trunk Allocation – Select either Shared or Dedicated.
Shared – When selected, this mobile extension will share mobile trunk ports with other mobile
extension users. You need to assign a mobile trunk Group ID to this extension. The system will
dynamically allocate a mobile trunk port within this Group ID when the system calls out to this
mobile extension number.
When the mobile extension user calls into the system, any mobile trunk port can answer the call,
verify caller ID, and play a dial tone to the mobile extension user.
Dedicated – Only analog trunks can be dedicated mobile trunks. When selected, you need to as-
sign a mobile trunk port to this mobile extension. You have the option to disable caller ID verification
if a mobile trunk port is dedicated to this mobile extension. The mobile extension user will hear a