AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 71)

Configuring System Speed Dialing
MaxCS 7.5 Administration Manual 55
Speed dial settings for individual extensions are set in Extension Configuration. (See “Setting up Station Speed
Dialing” on page 186.)
To configure Speed Dialing, select System > System Configuration, and then click the System Speed tab.
Figure 18. System Configuration, System Speed tab
Adding Speed Dial Entries
To add a speed dial entry,
1.
Click Add.
2. The next available ID is filled in for you, or you can select the ID number using the drop-down arrow.
3. Type a name for the Speed Dial entry, then enter the full number as you would dial it, with a maximum of
20 digits per entry. For example, the phone number 914085551212 comprises 9 (trunk access code), 1
(long distance prefix), followed by 408 (area code), and then the seven-digit telephone number.
Valid digits include 0 through 9, #, *, and (,) comma. The comma represents a one-second pause, when
IP trunks are not used.
Editing Speed Dial Entries
To edit an entry, double-click the number you want to work with, or select the number and click Edit. In the
dialog box that opens, edit the entry and click OK.
Figure 19. Speed Dial Configuration
To delete a system speed dial entry, select it in the System Speed tab and click Delete.
Note: System speed dial is read-only from MaxCS 7.5 and MaxAgent.