AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 47)

Preparation for Installation
MaxCS 7.5 Administration Manual 31
The following licenses are available for all-in-one (stand alone) systems only:
Licenses for Stand Alone Systems
Station License Per activated extension
ACM Agent Seat
Per concurrent login
(Single agent logged into multiple WGs will only take one license)
The following licenses are available for Softswitch/HMCP Media Server/Gateway systems only:
Licenses for Softswitch/HMCP Media Server/Gateway Systems
HMCP Media Server License Available resources in the system
HMCP G.711/G.723/G.729 Voice Processing
Resources
Available resources in the system
HMCP MeetMe Conference Available resources in the system
HMCP Supervision Available resources in the system
Softswitch Station License Per extension configuration
Softswitch ACM Agent Session License Per session
Softswitch ACM Agent Migration License Per ACC agent session
Gateway Per gateway
Preparation for Installation
Before you start installing MAXCS, you need the following:
• Windows Update – Make sure your server has the recommended Windows Service Pack or Update.
• MAXCS ACM 7.5 installation media – The MAXCS installation DVD or other media that contains the
MAXCS 7.5 programs.
• MAXCS latest update – Check to see if there is an update available to the MAXCS 7.5 Release.
• System Key – The system key can be either a USB hardware security device that must be attached to
the server MaxCS is running on, or it can be a soft system key.
• You cannot use both a hardware device and the soft system key at the same time.
• When using a soft system key, the MaxCS system must be a member of an Active Directory domain.
• Software license key – A 20-digit key located on the front of the End User License Agreement.
Installing MAX Communication Server
Softswitch installations – If you are installing the MAXCS 7.5 Softswitch version, follow the instructions in
the MAXCS 7.5 All-Software Solution Deployment Guide.
Upgrades – If you are upgrading from a previous release of MaxCS, review the instructions in the MaxCS 7.5
Upgrade Guidelines before you begin any installation steps. If you are upgrading from a release prior to
MAXCS 7.0 Update 1, then the installation program will check whether Microsoft Outlook has been installed
on the server. If it detects Outlook, you must uninstall Outlook before you can install MaxCS 7.5.
Other
Exchange Integration Per user
SIP Trunk Per activated SIP trunk
Licenses for MAXCS 7.5