AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 146)

Chapter 11: Board Configuration
130 MaxCS 7.5 Administration Manual
You can change the number to as many as 120 members in a maximum of 40 bridges, and you can activate
other HMCP resources, by double-clicking an HMCP board in Boards view and then clicking Board
Configuration
.
If you decrease the number of HMCP resources, the system must be
rebooted for the configuration to take effect.
If you increase the number of resources, the system does not have to
be rebooted.
Figure 78. The HMCP Board Configuration window
You may change the assigned number by entering a different number (up to the number your system is
licensed for and not to exceed the maximum limit for each HMCP board) in the Assigned to this board fields
and clicking Apply.
HMCP Resources – Shows the total number licensed (if applicable), total currently assigned, and the number
assigned to this HMCP board for the following resource types:
1.
Voice Processing Resources (VPR)
2. Station Conference Members
3. MeetMe Conference Members
4. Agent Supervision Bridges
The maximum number of resources that can be supported on an HMCP virtual board is as follows:
• G.711 VPR — 1,000
• G.711 / G.722 / G.723 / G.729 VPR
• Station Conference Members — 120
• MeetMe Conference Members — 120
• Agent Supervision Bridges — 20
Notes
• Codec G.722 is part of a combo codec and is controlled by license.