AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 55)

...or to open a line properties
window specific to the selected
extension.
Right-click an extension
to display its physical
location...
The View Windows
MaxCS 7.5 Administration Manual 39
Figure 5. Extension View window
Click on any column heading to sort by that column. Click again to reverse the sort order.
Double-click any extension number to open the Extension Configuration window for the selected extension.
The radio button to the left of each extension number is green when the extension is idle, and red when the
extension is not ready or in use. The Location number (for example, 01:0005) identifies the card logical ID and
port (channel) number on the board. For example, in location 01:0005, the card logical ID is 1 and the port
number is 5. If an IP Extension is logged on, the location will show the IP address.
The Reset button resets the selected extension to the idle status. You’ll be asked to confirm the reset.
You can click the Reset button without selecting an extension, and then type in the extension number for the
extension to reset.
Trunk View Window
The Trunk View window displays the status of all assigned trunks.
Right-click a trunk to display
its physical location or to
open a properties window
specific to the selected trunk.
Figure 6. Trunk View window