AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 344)

Working with Servers in the Domain
328 MaxCS 7.5 Administration Manual
Caution! The Server ID Length can be changed. However, if this number is changed, the server IDs are all
altered. If you increase the length, the number 0 is added to the front of the server IDs. For exam-
ple, if you change the length from 2 to 3, original ID 02 and 27 will become 002 and 027
respectively. If you change the length from 3 to 2, the original IDs 112 and 311 will become 12 and
11. It is advisable to keep the original length. If you are not sure about future expansion, using a
3-digit length is advised.
Adding a Server to a VoIP Domain
Important: Before you add a server to the domain, you need to make sure that the System ID (specified in
MaxAdmin, System Configuration tab) is not the same as another member server’s System ID.
Enterprise Manager will use the System ID to build a unique identifier in the multisite database.
Once a server is joined to a domain, you cannot change the System ID in MaxAdmin.
1. Click the Add button in the Global Server Location panel.
2. Define the attributes for the server, and click OK:
Parameter Definition
Name Enter the name of the server.
Address Enter the IP address of the server.
Server ID A unique dialing number to connect to this server.
Member Key
Enter this server’s member key. (Configured in this server’s
Enterprise Location Manager: VoIP > MultiSite Domain
Configuration).
After you add a member server to the Domain, an entry is also added to the IP dialing table and propagated
to all members automatically.
In the Global Server Location panel, the status will show "Active" if the Domain master communicates to the
member successfully.