AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 189)

Resolving Dialing Delay: Non-USA/Canada Countries
MaxCS 7.5 Administration Manual 173
3. On the Dialing Pattern tab of the Out Call Routing Configuration window, add dialing pattern definition
entries for the following prefixes:
• prefix = 0, length = 11
• prefix = 00, length = 14
• prefixes = 1-9, each length = 7
In the Route Priority field, use the list to select the En-Bloc route definition (assigned in step 2).
The Dialing Pattern tab should look as follows:
With this configuration, the system will see that all digits have been collected and will send digits to the CO,
instead of waiting 7 seconds for the dialing to finish.