NXP Semiconductors LPC24XX UM10237 - Manual (Page 144)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 144 of 792
NXP Semiconductors
UM10237
Chapter 8: LPC24XX Pin configuration
P1[7]/
ENET_COL/
MCIDAT1/
PWM0[5] 153 [1] D14 [1] I/O P1[7] — General purpose digital input/output pin.
I ENET_COL — Ethernet Collision detect (MII interface) (LPC2460 only).
I/O MCIDAT1 — Data line 1 for SD/MMC interface.
O PWM0[5] — Pulse Width Modulator 0, output 5.
P1[8]/
ENET_CRS_DV/
ENET_CRS 190 [1] C7 [1] I/O P1[8] — General purpose digital input/output pin.
I ENET_CRS_DV/ENET_CRS — Ethernet Carrier Sense/Data Valid (RMII
interface)/ Ethernet Carrier Sense (MII interface) (LPC2460 only).
P1[9]/
ENET_RXD0 188 [1] A6 [1] I/O P1[9] — General purpose digital input/output pin.
I ENET_RXD0 — Ethernet receive data 0 (RMII/MII interface) (LPC2460
only).
P1[10]/
ENET_RXD1 186 [1] C8 [1] I/O P1[10] — General purpose digital input/output pin.
I ENET_RXD1 — Ethernet receive data 1 (RMII/MII interface) (LPC2460
only).
P1[11]/
ENET_RXD2/
MCIDAT2/
PWM0[6] 163 [1] A14 [1] I/O P1[11] — General purpose digital input/output pin.
I ENET_RXD2 — Ethernet Receive Data 2 (MII interface) (LPC2460 only).
I/O MCIDAT2 — Data line 2 for SD/MMC interface.
O PWM0[6] — Pulse Width Modulator 0, output 6.
P1[12]/
ENET_RXD3/
MCIDAT3/
PCAP0[0] 157 [1] A16 [1] I/O P1[12] — General purpose digital input/output pin.
I ENET_RXD3 — Ethernet Receive Data (MII interface) (LPC2460 only).
I/O MCIDAT3 — Data line 3 for SD/MMC interface.
I PCAP0[0] — Capture input for PWM0, channel 0.
P1[13]/
ENET_RX_DV 147 [1] D16 [1] I/O P1[13] — General purpose digital input/output pin.
I ENET_RX_DV — Ethernet Receive Data Valid (MII interface) (LPC2460
only).
P1[14]/
ENET_RX_ER 184 [1] A7 [1] I/O P1[14] — General purpose digital input/output pin.
I ENET_RX_ER — Ethernet receive error (RMII/MII interface) (LPC2460
only).
P1[15]/
ENET_REF_CLK/
ENET_RX_CLK 182 [1] A8 [1] I/O P1[15] — General purpose digital input/output pin.
I ENET_REF_CLK/ENET_RX_CLK — Ethernet Reference Clock (RMII
interface)/ Ethernet Receive Clock (MII interface) (LPC2460 only).
P1[16]/
ENET_MDC 180 [1] D10 [1] I/O P1[16] — General purpose digital input/output pin.
O ENET_MDC — Ethernet MIIM clock (LPC2460 only).
P1[17]/
ENET_MDIO 178 [1] A9 [1] I/O P1[17] — General purpose digital input/output pin.
I/O ENET_MDIO — Ethernet MIIM data input and output (LPC2460 only).
P1[18]/
USB_UP_LED1/
PWM1[1]/
CAP1[0] 66 [1] P7 [1] I/O P1[18] — General purpose digital input/output pin.
O USB_UP_LED1 — USB port 1 GoodLink LED indicator. It is LOW when
device is configured (non-control endpoints enabled). It is HIGH when the
device is not configured or during global suspend.
O PWM1[1] — Pulse Width Modulator 1, channel 1 output.
I CAP1[0] — Capture input for Timer 1, channel 0.
Table 122. LPC2420/60/68 pin description …continued
Symbol Pin Ball Type Description