NXP Semiconductors LPC24XX UM10237 - Manual (Page 186)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 186 of 792
NXP Semiconductors
UM10237
Chapter 9: LPC24XX Pin connect
5.7 Pin Function Select Register 6 (PINSEL6 - 0xE002 C018)
The PINSEL6 register controls the functions of the pins as per the settings listed in
Table 9–138 . The direction control bit in the FIO3DIR register is effective only when the
GPIO function is selected for a pin. For other functions, direction is controlled
automatically.
[1] For flashless parts LPC2460/70, operates as BOOT0 pin on POR (see Section 8–6 ).
[2] For flashless parts LPC2460/70, operates as BOOT1 pin on POR (see Section 8–6 ).
5.8 Pin Function Select Register 7 (PINSEL7 - 0xE002 C01C)
The PINSEL7 register controls the functions of the pins as per the settings listed in
Table 9–139 . The direction control bit in the FIO3DIR register is effective only when the
GPIO function is selected for a pin. For other functions, direction is controlled
automatically.
The bit functions in this register depend on the number of pins of each LPC2400 part. For
the 180-pin LPC2458, see
Table 9–139 . For the 208-pin LPC2460/68/70/78, see
Table 9–140 .
Table 138. Pin function select register 6 (PINSEL6 - address 0xE002 C018) bit description
PINSEL6 Pin
name
Function when
00 Function
when 01 Function
when 10 Function
when 11 Reset
value
1:0 P3[0] GPIO Port 3.0 D0 Reserved Reserved 00
3:2 P3[1] GPIO Port 3.1 D1 Reserved Reserved 00
5:4 P3[2] GPIO Port 3.2 D2 Reserved Reserved 00
7:6 P3[3] GPIO Port 3.3 D3 Reserved Reserved 00
9:8 P3[4] GPIO Port 3.4 D4 Reserved Reserved 00
11:10 P3[5] GPIO Port 3.5 D5 Reserved Reserved 00
13:12 P3[6] GPIO Port 3.6 D6 Reserved Reserved 00
15:14 P3[7] GPIO Port 3.7 D7 Reserved Reserved 00
17:16 P3[8] GPIO Port 3.8 D8 Reserved Reserved 00
19:18 P3[9] GPIO Port 3.9 D9 Reserved Reserved 00
21:20 P3[10] GPIO Port 3.10 D10 Reserved Reserved 00
23:22 P3[11] GPIO Port 3.11 D11 Reserved Reserved 00
25:24 P3[12] GPIO Port 3.12 D12 Reserved Reserved 00
27:26 P3[13] GPIO Port 3.13 D13 Reserved Reserved 00
29:28 P3[14] [1] GPIO Port 3.14 D14 Reserved Reserved 00
31:30 P3[15] [2] GPIO Port 3.15 D15 Reserved Reserved 00
Table 139. LPC2458 pin function select register 7 (PINSEL7 - address 0xE002 C01C) bit
description
PINSEL7 Pin
name
Function when
00 Function
when 01 Function
when 10 Function
when 11 Reset
value
1:0 P3[16] Reserved Reserved Reserved Reserved 00
3:2 P3[17] Reserved Reserved Reserved Reserved 00
5:4 P3[18] Reserved Reserved Reserved Reserved 00
7:6 P3[19] Reserved Reserved Reserved Reserved 00