NXP Semiconductors LPC24XX UM10237 - Manual (Page 610)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 610 of 792
NXP Semiconductors
UM10237
Chapter 22: LPC24XX I 2 C interfaces I 2 C0/1/2
3. Exit
10.10.5 State : 0xC8
The last data byte has been transmitted, ACK has been received. Not addressed Slave
mode is entered.
1. Write 0x04 to I2CONSET to set the AA bit.
2. Write 0x08 to I2CONCLR to clear the SI flag.
3. Exit