NXP Semiconductors LPC24XX UM10237 - Manual (Page 166)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 166 of 792
NXP Semiconductors
UM10237
Chapter 8: LPC24XX Pin configuration
P2[0]/PWM1[1]/
TXD1/TRACECLK/
LCDPWR 154 [1] B17 [1] I/O P2[0] — General purpose digital input/output pin.
O PWM1[1] — Pulse Width Modulator 1, channel 1 output.
O TXD1 — Transmitter output for UART1.
O TRACECLK — Trace clock. [17]
O LCDPWR — LCD panel power enable. [17]
P2[1]/PWM1[2]/
RXD1/PIPESTAT0/
LCDLE 152 [1] E14 [1] I/O P2[1] — General purpose digital input/output pin.
O PWM1[2] — Pulse Width Modulator 1, channel 2 output.
I RXD1 — Receiver input for UART1.
O PIPESTAT0 — Pipeline status, bit 0. [17]
O LCDLE — Line end signal. [17]
P2[2]/PWM1[3]/
CTS1/PIPESTAT1/
LCDDCLK 150 [1] D15 [1] I/O P2[2] — General purpose digital input/output pin.
O PWM1[3] — Pulse Width Modulator 1, channel 3 output.
I CTS1 — Clear to Send input for UART1.
O PIPESTAT1 — Pipeline status, bit 1. [17]
O LCDDCLK — LCD panel clock. [17]
P2[3]/PWM1[4]/
DCD1/PIPESTAT2/
LCDFP 144 [1] E16 [1] I/O P2[3] — General purpose digital input/output pin.
O PWM1[4] — Pulse Width Modulator 1, channel 4 output.
I DCD1 — Data Carrier Detect input for UART1.
O PIPESTAT2 — Pipeline status, bit 2. [17]
O LCDFP — Frame pulse (STN). Vertical synchronization pulse (TFT). [17]
P2[4]/PWM1[5]/
DSR1/
TRACESYNC/
LCDENAB/LCDM 142 [1] D17 [1] I/O P2[4] — General purpose digital input/output pin.
O PWM1[5] — Pulse Width Modulator 1, channel 5 output.
I DSR1 — Data Set Ready input for UART1.
O TRACESYNC — Trace Synchronization. [17]
O LCDENAB/LCDM — STN AC bias drive or TFT data enable output. [17]
P2[5]/PWM1[6]/
DTR1/
TRACEPKT0/
LCDLP 140 [1] F16 [1] I/O P2[5] — General purpose digital input/output pin.
O PWM1[6] — Pulse Width Modulator 1, channel 6 output.
O DTR1 — Data Terminal Ready output for UART1.
O TRACEPKT0 — Trace Packet, bit 0. [17]
O LCDLP — Line synchronization pulse (STN). Horizontal synchronization
pulse (TFT).
[17]
P2[6]/PCAP1[0]/
RI1/
TRACEPKT1/
LCDVD[0]/
LCDVD[4] 138 [1] E17 [1] I/O P2[6] — General purpose digital input/output pin.
I PCAP1[0] — Capture input for PWM1, channel 0.
I RI1 — Ring Indicator input for UART1.
O TRACEPKT1 — Trace Packet, bit 1. [17]
O LCDVD[0]/LCDVD[4] — LCD data. [17]
P2[7]/RD2/
RTS1/
TRACEPKT2/
LCDVD[1]/
LCDVD[5] 136 [1] G16 [1] I/O P2[7] — General purpose digital input/output pin.
I RD2 — CAN2 receiver input.
O RTS1 — Request to Send output for UART1.
O TRACEPKT2 — Trace Packet, bit 2. [17]
O LCDVD[1]/LCDVD[5] — LCD data. [17]
Table 124. LPC2470/78 pin description …continued
Symbol Pin Ball Type Description