NXP Semiconductors LPC24XX UM10237 - Manual (Page 25)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 25 of 792
NXP Semiconductors
UM10237
Chapter 2: LPC24XX Memory mapping
read/fetch from 0x0000 0008 will provide data stored in 0x4000 0008. In case of
MEMMAP[1:0] = 00 (Boot Loader Mode), read/fetch from 0x0000 0008 will provide data
available also at 0x7FFF E008 (Boot ROM remapped from on-chip Bootloader).
Fig 9. Map of lower memory is showing re-mapped and re-mappable areas for a
LPC2400 part with flash
0.0 GB
0x8000 0000
0x4000 0000
0x3FFF FFFF
0x0000 0000
1.0 GB
2.0 GB - 8 kB
2.0 GB
ACTIVE INTERRUPT VECTORS
(FROM FLASH, SRAM, BOOT ROM, OR EXT MEMORY)
BOOT FLASH
RESERVED ADDRESS SPACE
(SRAM INTERRUPT VECTORS)
512 kB FLASH MEMORY
RESERVED FOR ADDRESS SPACE
(BOOT ROM INTERRUPT VECTORS)
8 kB BOOT ROM
64 kB STATIC RAM
0x7FFF FFFF
FAST GPIO REGISTERS
PARTCFG REGISTERS
0x3FFF 8000
0x3FFF C000
0x3FFF BFFF
8 kB BOOT FLASH
(RE-MAPPED FROM TOP OF FLASH MEMORY)
EXTERNAL MEMORY INTERRUPT VECTORS
0x7FFF E000
0x7FFE FFFF
0x7FFE E000
2.0 GB - 64 kB
2.0 GB - 72 kB
0x0007 FFFF
0x0008 0000
0x4001 0000
0x4000 FFFF