Lenze 9400 - Manual (Page 30)

4 Drive interface
4.1 Machine parameters
30
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.1 Mains voltage
Via the Mains voltage list field ( C00173 ) the mains voltage for the controller is set.
• If you set a mains voltage with an adjustable threshold for undervoltage ("LU adjustable"), this
undervoltage threshold can be set in the Undervoltage threshold (LU) input field ( C00174 ).
• In the Resp. to DC-bus overvoltage list field ( C00600 ) you can select the response that is to be
effected when a DC-bus overvoltage occurs.

Tip!
In the chapter "Rated data" of the hardware manual the device types and their permissible
device utilisation at a certain mains voltage and switching frequency are specified.
See also:  Monitoring of the device utilisation ( 108)

Note!
Changing the setting in C00173 also affects the permissible device utilisation!