Lenze 9400 - Manual (Page 588)

12 Oscilloscope
12.4 Operation
588
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Automatic scaling function
Use the automatic scaling function to automatically scale and reposition the representation of
selectable signal characteristics in the oscillograph and reset the offset to "0".

How to carry out automatic scaling:
1. Go to the oscilloscope toolbar and click the icon to activate the automatic scaling
function.
2. Select the channels/variables for automatic scaling in the Select variable dialog box.
3. Click OK.
• The dialog box is closed and the selected channels/variables are scaled automatically.
Vertical stretching Hold down the left mouse button and move the mouse pointer on the vertical
scale to the bottom to stretch the shown selection from the top.
• Moving the mouse pointer in opposite direction continuously reduces the
stretching.
Hold down the right mouse button and move the mouse pointer on the vertical
scale to the top to stretch the shown selection from the bottom.
• Moving the mouse pointer in opposite direction continuously reduces the
stretching.
Return to original
representation
Click the right mouse button in the oscillograph to return step by step to the
original representation.
Zoom function Procedure