Lenze 9400 - Manual (Page 51)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
51
4 Drive interface
4.2 Device commands
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2.7 Delete logbook
The C00002 = "20: Delete logbook" device command is used to delete all entries in the logbook.

Tip!
To display the logbook in the »Engineer«, click the Logbook button on the Diagnostics tab.
In the Logbook dialog box, it is also possible to delete all logbook entries by clicking the
Delete button.
Further information on the logbook can be found in the chapter "
Diagnostics & fault
analysis ". ( 598)
Possible status displays for this device command
Related device commands
 Archive logbook ( 52)
Status ( C00003 ) Meaning
1344770 Device command in process
1310720 Device command executed successfully
1310721 General fault