Lenze 9400 - Manual (Page 520)

11 Basic drive functions
11.12 Brake control
520
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Outputs
BRK_bBrakeApplied
C02609/3 | BOOL
Input for status detection via switching contacts at the brake
• Activation of the input by setting C02583 = 1.
 Signal configuration ( 523)
FALSE Status "Brake is released".
TRUE Status "Brake is applied".
BRK_bBrakeTest
C02609/4 | BOOL
Start/abort of the brake test
 Carrying out brake test ( 549)
TRUE Carry out brake test
TRUEFALSE Abort brake test (deactivate mode).
BRK_bBrakeGrindIn
C02609/5 | BOOL
Start/abort of the brake grinding process
 Grinding the brake ( 547)
TRUE Brake grinding.
TRUEFALSE Abort grinding process (deactivate mode).
Identifier
DIS code | data type
Value/meaning
BRK_dnState
C02607 | DINT
Status (bit coded)
• Bits which are not listed are not assigned with a status (always "0").
Bit 1 Brake control is active.
Bit 4 Motor brake control module is used.
Bit 8 Brake status (internal status signal).
Bit 9 Torque feedforward control is active.
Bit 10 Controller inhibit by brake is active or set.
Bit 15 Fault is active (collective message).
Bit 16 State "Grinding the brake".
Bit 17 State "Brake test".
Bit 18 State "Direct control".
Bit 19 State "Automatic control".
Bit 20 Fault: External feedback.
Bit 21 Fault: Position drift when brake is applied/checked.
Bit 22 Error: Monitoring of motor brake control module
Bit 23 Information: Brake activation via waiting time.
Bit 24 Information: Brake grinding process completed.
Bit 25 Information: Brake test completed.
Bit 26 Fault: Feedforward control torque could not be established within
one second.
Bit 27 Information: Current speed has fallen below the threshold for brake
activation set in C02581 .
BRK_bReleaseBrakeOut
C02609/6 | BOOL
Control signal for triggering an external brake/status signal for control state
FALSE Apply brake.
TRUE Release brake.
BRK_bBrakeReleased
C02609/7 | BOOL
Status signal of the brake control considering the closing and opening time of the
brake
FALSE Brake is applied (after the brake closing time has elapsed).
TRUE Brake released (when the brake release time has elapsed).
Identifier
DIS code | data type
Information/possible settings