Lenze 9400 - Manual (Page 583)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
583
12 Oscilloscope
12.4 Operation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to change a selection:
1. Double-click the variable to be changed and recorded in the Vertical channel settings in the
Name column.
2. Select a new variable in the Select variable dialog box.
3. Click OK.
• The dialog box is closed and the selection is accepted.

How to delete a selection:
1. Right-click the variable to be removed in the Vertical channel settings list field to open the
context menu.
2. Select the Delete command in the context menu.
Column Name Meaning
1 - Curve colour for representation in the oscillogram
2 Ch Channel number
3 On On/off
4 Inv Inversion on/off
5 Name Selection of variable to be recorded
6 Unit Scaling
7 1/div Vertical scale factor
8 Offset Offset value
• The offset value depends on the scale factor and is marked by a dotted
line in curve colour at the left edge of the oscillogram.
9 Position Position value
• The position value is independent of the scale factor and is marked by a
line at the left edge of the oscillogram.