Lenze 9400 - Manual (Page 552)

11 Basic drive functions
11.13 Cam data management
552
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.13 Cam data management
This function extension is available from software version V3.0!
The basic function "Cam data management" provides different functions for the systemwide
management of the cam data available in the memory module for a cam application.
• Cam data are motion profiles/characteristics, cam tracks, and position marks.
• The cam data required can either be created using the »Cam Editor« and transmitted to the
controller by means of »Engineer«, or they can be directly entered via the parameters of this
basic drive function if cam data have already been downloaded.

Note!
For the use of cam data in the controller, the licence level Motion Control TopLevel is
required!