Lenze 9400 - Manual (Page 632)

13 Diagnostics & fault analysis
13.7 Error messages of the operating system
632
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Real-time clock: Battery empty, time lost [0x00680024]
Code refresh [0x00690000]
Internal error (memory area - logbook) [0x00690001]
Internal error (LDS instance data) [0x00690002]
Module ID (decimal) Error ID (decimal)
104: Module identification 36
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The battery integrated in the clock in the MM440
memory module is empty. The clock has been reset to its
initial value (01.01.1970 - 00:00:00 o'clock).
• If the memory module is used for the first time,
restart the controller to initialise the memory
module.
• If the problem occurs again, replace the memory
module.
Module ID (decimal) Error ID (decimal)
105: Error check of the program memory during runtime 0
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch the controller off and then on again.
• Please contact Lenze if the problem occurs again.
Module ID (decimal) Error ID (decimal)
105: Error check of the program memory during runtime 1
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch the controller off and then on again.
• Please contact Lenze if the problem occurs again.
Module ID (decimal) Error ID (decimal)
105: Error check of the program memory during runtime 2
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Serious device error or component failure. Switch the controller off and then on again.
• Please contact Lenze if the problem occurs again.