Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 140)

NTP server address
Polling interval
Spanning tree setting
Enable / Disable *
LPR protocol setting
Enable * / Disable
RAW protocol
ON * / OFF
LLMNR
ON * / OFF
Gigabit Ethernet settings
Autonegotiation * / 10 Mbps half duplex / 10 Mbps full duplex / 100 Mbps half duplex / 100 Mbps
full duplex / 1 Gbps full duplex
Use Dedicated Port
ON * / OFF
Wi-Fi DRX setting
Enable * / Disable
Wired LAN DRX setting
Enable * / Disable
Reset SSL certificates
Reset LAN settings
140