Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 661
Problems with the Printing Quality
Printing is faint
Paper rubs against the Print Head
The edges of the paper are dirty
The surface of the paper is dirty
The back side of the paper is dirty
Immediately after borderless printing, the trailing edge margin is soiled during regular printing
Printed colors are inaccurate
Banding in different colors occurs
Colors in printed images are uneven
Image edges are blurred or white banding occurs
The contrast becomes uneven during printing
The length of printed images is inaccurate in the feeding direction
Images are printed crooked
Documents are printed in monochrome
Line thickness is not uniform
Lines or colors are misaligned
Borders appear in borderless printing
Cannot Specify Extension for borderless printing After Warning Message
Cannot Print over Network
Cannot Connect Printer to Network
Cannot Print over TCP/IP Network
Cannot Print over Bonjour networks
Cannot Find Printer on Network
Cannot Find Printer on Check Printer Settings Screen (Windows)
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
Searching Printer by IP Address or Host Name During Setup
Cannot Find Printer while Using Wi-Fi
Cannot Find Printer while Using Wired LAN
Cannot Print Using AirPrint
Installation Problems
Removing Printer Software
Taking Time to Setup Process (Windows)
Failed to Printer Driver Installation (Windows)
HP-GL/2 problems
With HP-GL/2, printing is misaligned
Lines or images are missing in printed HP-GL/2 jobs
Lines are printed too thick or thin in HP-GL/2 print jobs
HP-GL/2 jobs are printed in monochrome (or color)
Printed colors of lines are inaccurate during HP-GL/2 printing
HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 printing takes a long time
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
661