Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 228)

Changeable Setting Items Using Web Browser
Note
• The items described here and the items displayed in the web browser may differ in display order.
• The item which can be used is different in administrator mode or in standard user mode.
Items for Security
Security (Item for administrator)
This function allows you to specify the password, the standard user mode settings, the operation
restrictions, and SSL/TLS settings of certificate for encrypted communication.
For details on setting password, see Setting Password .
Operation panel lock (Item for administrator)
Select this item from Custom settings on Device settings .
Selecting Enable disables any operations using the operation panel.
A message informing you that operations are invalid appears when you tap the touch screen. An
error or warning is displayed even while this function is enabled.
Items for Maintenance/Management
Utilities
This function allows you to set and execute the printer utility functions such as cleaning.
Job management
This function allows you to display the job history and print it. In addition, you can delete jobs from
this item.
Note
• When you are logging on in administrator mode, you can restrict this function in standard user
mode.
System info and LAN settings
This function allows you to check the system information and to change the LAN settings.
Using IP filtering in Advanced setup in LAN settings , you can permit or refuse the connection of a
specific IP address for IPv4 address or IPv6 address.
Using SNMP settings in Advanced setup in LAN settings , you can specify the SNMP and MIB
setting to management the printer via a network.
Important
• If you have refused the IP address of administrator's device using IP filtering by mistake, reset
LAN settings of the printer. To reset LAN settings, select System info and LAN settings > LAN
settings > Advanced setup > Reset LAN settings , and then select Yes .
If you place a check mark of Enable HTTPS redirection in CHMP settings in Advanced setup in
LAN settings , it becomes possible to authenticate the communication partner and encrypt the
communication data by HTTPS communication.
228