Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 218)

B: Position of cut
The paper is cut with the length of the image drawing range determined based on the Detect image
size setting.
• When OFF or Command priority is selected for Detect image size and Enable is selected for
Oversize:
Since margins are added outside the image drawing range, images will not be chipped due to the
margins.
C: Position of cut
The paper is cut with the length obtained by adding the upper and lower margins to the length of the
image drawing range determined based on the
Detect image size setting.
218