Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 76)

Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, ink may be transferred onto the paper surface
during ejection, soiling it. In that case, you may be able to improve the condition by setting the time to wait
for the ink to dry after printing.
Note
• If the cutter touches the print surface on which the ink is not dry, the paper surface may become
scratched or soiled, or the paper surface may rub when the paper falls and the surface may become
soiled.
To wait for the ink to dry without allowing printed materials to fall after printing, set Cutting mode on the
printer menu to Eject cut . (See " Specifying the Cutting Method for Rolls .")
• The settings can also be made from the operation panel on the printer. From ( Setup ) on the Home
screen, select Device settings > Paper-related settings > Advanced paper settings >(media types
selection) and set Pause between scans or Pause between pages .
Windows
1. Display the printer driver dialog box.
(See " How to Open the Printer Driver Setup Window .")
2. Select Main sheet and click Specify... for Media Type .
76