Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 557)

After the Information dialog is displayed, under Roll Width , select the same paper width as that of
the paper roll loaded in the printer and click OK .
5. Click Borderless Setting
When the Borderless Setting dialog box is displayed, place a checkmark next to Three-sided
Borderless , and then click OK .
6. Select a method for printing borderless
In the Borderless Printing Method tab, place a checkmark next to the Fit Paper Size option.
If the size of the document is different from the size of the paper you want to print on, select the paper
size you want to print on from
Printer Paper Size .
7. Complete the setting process
Click OK .
If you print now, the document will be printed without margins on three sides to fit the paper size.
8. Cut the right side of the paper
Cut the margin on the right side of the paper with scissors after printing. Cut slightly to the inside of the
margin as the document is enlarged to extend slightly beyond the specified size.
To get the document to standard size, it is recommended to take measurements and cut in the correct
positions.
557