Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 92)

Note
• If any paper has been advanced that will not be used, a message is shown requesting you to
remove it.
Follow the instructions on the screen to remove the paper, and redo the operation.
3. Align the sheets to load them onto the roll holder.
With their print side up, place the sheets against the flange (A) of the roll holder.
Note
• Load the sheets so that the long side of the loaded paper is vertical.
• If there is a lot of roll paper remaining, you may not be able to place the sheets against the
flange (A) on the right side of the roll holder.
• If the width of the sheets is larger than the width of the loaded roll paper, you may not be able to
load the sheets.
• If printing cannot be done well using the method explained above, try Using the Paper Feed
Guide to Load Sheets .
4. Load the sheets into the paper feed slot.
Insert the paper until the leading edge makes contact.
An alarm sounds when the paper is inserted into the paper feed position.
92