Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 157)

Other device settings
This setting item is displayed by tapping Device settings after tapping ( Setup ) on the HOME
screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using
the operation panel.
• Energy saving settings
To save electricity, enable this setting to turn off the printer automatically or to enter sleep mode when
specified length of time has elapsed.
◦ Auto power off
Sets the time until the printer turns off automatically. If no operations are performed on the printer for
the specified duration of the time after entering Sleep mode, the printer automatically turns off.
◦ Sleep timer
Specifies the length of time to enter sleep mode automatically when no operation is made.
• Operation restrictions
Restricts the following operations.
◦ Job history
Restricts to display the print job history.
◦ Remote UI
Restricts to use Remote UI.
• Use USB connection
Enables / Disables USB connection.
• Date/time setting
Sets the current date and time.
• Date display format
Sets the format of dates displayed on the touch screen and printed on photos.
• Time zone (GMT)
Specifies the time zone according to a country or region you live in.
Specifying the time zone allows you to display the correct time and date an e-mail was sent on your mail
software.
Select the time difference from GMT (Greenwich mean time) according to a country or region you live in.
• Sound control
Select whether to sound / not sound for key touch sound and alarm sound.
157