Windows).), Print for width of roll – Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 561
Printing Hanging and Horizontal Banners (Large-Format
Printing)
A drapery or banner up to 18.0m can be made by enlarging or reducing original documents made on
application software.
However, there are cases in which an 18.0 meter banner cannot be printed because the application
software used has limits on the document size that can be set.
The procedure for printing hanging and horizontal banners is as follows:
Print for width of roll
1.
Create document by using application software
2.
Open the
3.
Select the paper size
Select the same original paper size created in the application soft in the
Page Setup
tab's
Page Size
.
In the event an optional size is set in the application software, select
Custom Size
from
Custom
Paper Size
in
Page Size
in the dialog box that appears.
4.
Select roll width
Select the equivalent to the paper width of the roll set in the printer under
Roll Width
.
5.
Set
Enlarged/Reduced Printing
Check
Enlarged/Reduced Printing
and select
Fit Roll Paper Width
.
When the
Information
dialog box appears, select the equivalent to the paper width of the roll set in
the printer.
561