Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 630)

Three-sided Borderless
If you check this check box, and the width or the length of the output paper size is smaller than the
roll width, a margin will be created on the right of the document, and the remaining three sides (top,
bottom, and left) will be borderless when printing.
Custom Size Settings dialog box (Roll Paper Width)
Enter the roll width you want to use.
Roll Paper Width
Specify the Width of the roll paper. Measurement is shown according to the units specified in Units .
Units
Select the unit for entering a user-defined paper size.
Roll Paper Options dialog box
You can specify settings for printing on roll paper.
Automatic Cutting
You can print cut guidelines for cutting the roll paper automatically or manually after printing.
Yes
Cut the roll paper automatically after printing.
No
Do not cut the roll paper automatically after printing.
Print Cut Guideline
Prints cut guidelines for cutting the roll paper manual after printing.
Banner Printing
Select this check box to print documents extending over several pages as one continuous document
without any spaces between the pages.
Paper Size Options dialog box
You can create and register any user-defined paper. You can then select the defined paper size from
Custom Paper Size of Page Size .
Paper Size List
The names and sizes of the paper sizes that the printer driver can use are displayed.
Delete
From Paper Size List , you can delete a user-defined paper that a user created.
Note
• Paper deletion is not possible in the following case:
• When a standard paper size of the printer driver is selected
• When an oversized paper size is selected
• When a paper size with a red circle is selected
630