Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 317
Setting Criteria for Printer Search/Searching Specific Printer
You can set the criteria for printer search when you start up IJ Network Device Setup Utility or update the
printer search, or you can search the specific printer.
Changing these settings may detect the printer you want to use if it is not detected.
Note
• If the printer you want to use is not detected, it may be detected by entering IP address, subnet mask,
or default gateway on the operation panel and search again.
Setting Criteria for Printer Search
Searching Specific Printer
Setting Criteria for Printer Search
1.
Start up IJ Network Device Setup Utility.
2.
Check the displayed message and select
Yes
.
3.
Select
Printer Network Setup
on the displayed screen.
Detected printers are listed.
4.
Select
Search Settings...
on
Option
menu.
The
Search Settings
screen appears.
5.
Enter criteria for printer search.
A: Search Time:
Specifies the time to search printers.
B: Time out:
Specifies the timeout length for not receiving a response from printer.
Note
• Printers you want to find are more likely to be detected as the values are larger, however, it may
take a while to search them.
317