Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 494)

Printing with Easy Setup
This section describes the simple setting procedure so that you can carry out appropriate printing on this
printer.
Printing with Easy Setup
1. Check that printer is turned on
2. Load paper on the printer
Set
roll paper or cut paper to a printer.
3. Open the printer driver setup window
4. Select the media type
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.
Important
• See "Paper Information List" for Canon authentic paper or Canon output check paper.
Note
• Click Get Information... to display the Paper Information on Printer dialog box. The Paper
Information on Printer dialog box allows you to get the paper information from the printer and
to set the paper source and the media type on the printer driver.
• For instructions on changing the media type from the printer's operation panel, see " Changing
the Type of Paper ."
494