Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 202)

Detect image size
Specifies the output object area method that provides efficient printing, which avoids parts of images being
cut off when a HP-GL/2 data does not include image drawing range information.
This setting item is displayed by tapping in the following order.
( Setup ) > Device settings > Print settings > HP-GL/2 print settings > Processing options
• OFF (Initial setting)
Normally, use this setting.
Note
• When a HP-GL/2 data include image drawing range information, the image drawing range is
determined using that information.
When a HP-GL/2 data does not include image drawing range information, the image drawing range
use the printer's maximum roll paper width as the horizontal dimension and 1.5 times the maximum
roll paper width as the vertical dimension.
• Command priority
When select OFF , the drawing image is missing or is output as a blank sheet, use this setting.
Note
• When a HP-GL/2 data include image drawing range information, the image drawing range is
determined using that information.
When a HP-GL/2 data does not include image drawing range information, the image drawing range
is determined using the value designated by another command in the data.
However, not all HP-GL/2 data can be supported.
202