Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 154
IPv6 DNS host name
XXXXXXXXXXXX
IPv6 DNS domain name
XXXXXXXXXXXX
MAC address
XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings
Enable (ESP)
/
Enable (ESP & AH)
/
Enable (AH)
/
Dis-
able
Printer name
XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)
To change the setting, tap
Settings
.
◦
Enable/disable Wired LAN
Select
Enable
when connecting to wired LAN.
Note
• By tapping
Advanced
, you can set LAN in detail.
For the items that can be set, see the following.
•
Print details
Prints out the LAN setting information of the printer with Wi-Fi connection, wired LAN connection,
wireless direct connection.
For the items that can be checked, see the following.
Important
• Important information on your computer is stated on the paper on which the LAN setting information
is printed. Please handle with care enough.
Note
• You can also print out the LAN setting information by tapping in the following order.
(
Setup
) >
Device settings
>
Test print
>
Print LAN details
•
Advanced
By tapping
Advanced
on each setting screen of Wi-Fi connection, wired LAN connection, wireless direct
connection, LAN information can be set in detail.
Important
• If the LAN is disabled, the following items can not be selected.
154