Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 622)

Important
• Depending on the Media Type settings, the same print results may be produced even if
the Print Quality is changed.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality. Resolution settings depend on media type.
Fast
Gives priority to printing speed over print quality.
Custom
Opens the Custom dialog box .
Select this when you want to set the printing quality level individually.
Color Mode
Select the color to print.
Color
Prints with the number of colors in the document.
Monochrome
Print in grayscale.
Monochrome Bitmap
Print all non-white parts in black.
Color Settings
Opens the Color Settings dialog box .
You can adjust individual color settings such as Cyan , Magenta , Yellow , Brightness ,
and Contrast on the Color Adjustment tab, and select the Color Correction method on
the Matching tab.
Thicken Fine Lines
Prints thin lines thicker for easier viewing.
Preview before printing
You can start up the Canon imagePROGRAF Preview, and check what the printing results will be
before executing the print.
Check this check box to display a preview before printing.
Status Monitor...
Displays the status monitor.
About
Opens the About dialog box.
You can check information such as the version and copyright of the printer driver.
Defaults
Restores all the settings you have changed to their default values.
Clicking this button restores all the settings on the current screen to their default values (factory
settings).
622