Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 435)

Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand
Note
• Depending on the product, a stand may not be provided.
1. To use the optional stand, assemble the stand by referring to the Printer Stand Setup
Guide that was provided with the stand.
Caution
• The stand must be assembled by at least two people on a flat surface. Attempting assembly by
yourself poses a risk of injury or bending the Stand.
• When assembling the stand, lock all four of the casters. Attempting to move the stand when the
casters are locked poses a risk of injury or damage to the location site.
• When moving the stand, make sure that the basket does not graze the floor and that all four of
the casters are unlocked before moving the stand. Not doing so may damage the basket,
scratch the floor, or cause injuries.
Install the printer
1. Mount the printer on the assembled stand and tighten the screws firmly.
435