Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 94
Note
• For how to remove the roll holder, see "
Removing the Roll from the Printer
2.
Select sheets as the paper source.
•
If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are
shown on the operation panel.
Tap
OK
and
Load paper
.
•
If no print job was received
1. Tap
Load paper
or
Replace paper
.
2. Tap
Load cut sheet
or
Replace cut sheet
.
Note
• If the Home screen does not appear, press the
HOME
button.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to
remove it.
Follow the instructions on the screen to remove the paper, and redo the operation.
3.
Use the paper alignment line to align and load the sheets.
With its print side up, load a sheet in the paper feed slot, with the right edge aligned with the paper
alignment line's white line (A), and then insert the sheet into the paper slot.
Insert the paper until the leading edge makes contact.
An alarm sounds when the paper is inserted into the paper feed position.
94