Cannot find printer while using wired lan – Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 749
Cannot Find Printer while Using Wired LAN
Check1
Make sure printer is turned on.
If not, make sure the printer is securely plugged in and press
ON
button to turn on.
The
ON
lamp flashes while the printer is initializing. Wait until the
ON
lamp stops flashing and remains lit.
Check2
Is
icon displayed on touch screen?
If the icon is not displayed, wired LAN is disabled.
If not, select
(
Setup
) icon,
Device settings
,
LAN settings
,
Wired LAN
,
Settings
, and then select
Enable
for
Enable/disable Wired LAN
.
Check3
Make sure LAN cable is connected properly.
Make sure the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the cable
properly.
If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN side of the router.
749