Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 289)

Reconfiguration Method of LAN Connection/Reconfiguration
Method of Wi-Fi Connection
Changing LAN Connection Method
Changing Wi-Fi Connection Method
Changing LAN Connection Method
Follow either procedure below to change LAN connection method (wired or wireless).
• For Windows:
◦ Redo setup using the Setup CD-ROM or from the web page.
◦ Select
Enable for Enable/disable Wired LAN or Enable/disable Wi-Fi in the touch screen
menu.
After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility.
For details, refer to Performing/Changing Wi-Fi Settings or Performing/Changing Wired LAN
Connection (Ethernet Cable) Settings .
• For macOS:
Redo setup from the web page.
Changing Wi-Fi Connection Method
Follow either procedure below to change Wi-Fi connection method (infrastructure or wireless direct).
• For Windows:
◦ Redo setup using the Setup CD-ROM or from the web page.
◦ Perform settings on the
Network Settings screen on IJ Network Device Setup Utility.
Important
• Before you perform settings using IJ Network Device Setup Utility, change the printer settings
following the procedure below.
1. Check that printer is turned on.
2. Select ( Network status ) icon.
Menu Operations
If you specify the administrator password, enter the password.
3. Select Wi-Fi .
4. Select Settings .
289