Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 373)

Selecting Feed Amount Adjustment Method
There are two methods of adjusting the paper feed amount, Prioritize print quality and Prioritize length
accuracy , either of which will be applied during printing.
Since the method that is applied during printing is determined from the value of the Set priority setting,
configure Set priority to match the print target.
Follow the procedure below to perform settings.
1. Load paper.
Loading Rolls on the Roll Holder
Loading Rolls in the Printer
Loading Sheets in the Printer
2. On the HOME screen, tap ( Setup ).
Menu Operations
3. Tap Maintenance .
4. Tap Paper feed adjustment .
5. Tap Set priority .
6. Tap paper to adjust.
7. Tap setting.
Auto
Prioritize print quality or Prioritize length accuracy is selected, depending on the setting as
selected in the printer driver at the time of printing.
Prioritize print quality
Adjusts the feed amount to reduce banding across the sheet in printed documents. Adjust print
quality settings are applied. When Paper feed fine adjustment is executed, the Paper feed fine
adjustment settings are applied in addition to the Adjust print quality settings.
Prioritize length accuracy
Adjusts the feed amount for better accuracy of lines in printed documents. The value of Change
adjustment values in Adjust feed length is applied.
8. Tap OK .
373