Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 544
The
Custom Size Settings
dialog box opens.
3.
Set the custom paper size
Enter the
Width
and
Height
values of the paper to be used, specify the
Units
, and then click
OK
.
4.
Complete the setup
Click
OK
on the
Page Setup
tab.
When you execute print, the data is printed with the specified paper size.
Important
• If the application software that created the document has a function for specifying height and width
values, use the application software to set the values. If the application software does not have such a
function or if the document does not print correctly, perform the above procedure from the printer driver
to set the values.
• Printing may be disabled depending on the size of the specified user-defined media.
For information about printable sizes for user-defined media, see "
• Any paper size that was set by using
Custom Size
can no longer be used after the application software
is closed.
544